If you have an awning made of duck canvas or acrylic fabric, the inside can be waterproofed with a proprietary seam sealant. Check out do all awnings fit a motorhome too. Be sure to let the seam sealant completely dry before packing the awning. A poorly sealed seam can cause the fabric to stick together. It is recommended to have seams sealed by a professional. Here are a few tips to waterproof your awning. Follow these tips and your awning will last a long time!
Duck canvas
Waterproofing the inside of your awning is a simple process. Unlike traditional waterproofing materials, such as plastic, a waterproofing treatment works by making water bead on the fabric’s surface and evaporate back into the air. This treatment is effective for protecting your awning from water, and has many other advantages. The tight weave of water-repellent canvas makes it a great choice for outdoor awnings. It’s been used for outdoor activities for centuries.
While cotton-made duck canvas won’t offer any water resistance, synthetic acrylic canvas can provide a decent level of water resistance. The fabric won’t fade, and it is UV-resistant. However, it requires a waterproofing treatment every year to prevent fading. Other types of canvas, such as silicone, are not canvas at all. These types of fabrics are more similar to plastic sheeting.
Acrylic fabric
Regardless of whether you use vinyl or acrylic fabric, it is important to take care of your awning as needed. The awning’s fabric needs to breathe so that the warm air can escape, allowing it to keep the area cool. Acrylic fabrics are lightweight, water repellent, mildew resistant, and UV-resistant. While they are not waterproof, they do allow air to move through. They are also known to stretch or shrink depending on the weather and temperature. They are also considerably more expensive than cotton duck, but their breathable properties make them a great choice for a porch or patio.
In addition to waterproofing the inside of the awning, acrylic fabrics are also better than canvas for two main reasons. First of all, they can withstand light rain and wind, but they are not waterproof. If you live in a humid climate, the wood used in the awning’s poles may need sanding and sealing. Second, acrylic fabrics are not fully waterproof, but they do repel the most light rain.
Spray awning waterproofing
Before you apply a spray awning waterproofing material, make sure that the driveway awnings or any other type is clean and dry. A second coat will be necessary for a water-tight seal. Depending on the sealant used, the awning may require two or four coats. While applying the sealant, make sure to wear protective gear and use an eye mask. Always spray the fabric evenly. You can also roll out the awning to air dry.
The process of applying the liquid is fairly simple. Be sure to follow all of the instructions, and don’t forget to pay close attention to small details. Generally, you’ll want to use a petroleum-based waterproofing liquid. There are many brands available, so choose one that works for your fabric type. Once you’ve found the right liquid, follow the manufacturer’s instructions to the letter. Once the liquid is applied, let it dry for at least four hours before applying a second coat.